PPWR: Information for businesses

Every piece of packaging begins with meeting specific needs: a product to protect, a story to tell and the requirements of those who use it. Today, this journey also touches PPWR, the European Packaging and Packaging Waste Regulation.

The EU Regulation 2025/40 is applied from 12 August 2026, with requirements and deadlines phased over time. For businesses, this means understanding the obligations relevant to their packaging and incorporating them into design decisions and documentation.

At Scatolificio Medicinese, we are ready to support you on this journey, working together to design corrugated cardboard packaging that meets your needs and the applicable PPWR requirements.

What kind of packaging falls under PPWR?

PPWR covers all packaging and packaged products placed on the market, across all materials: cardboard, plastic, glass, wood and metal. Packaging types are divided into three categories:

  1. Sales packaging or primary packaging: this directly touches the product and is what the consumer purchases alongside it at the point of sale. It usually contains a single unit of the product.
  2. Multiple packaging or secondary packaging: this groups together several units of the product in their primary packaging and is mainly used for shelf display or to move goods within the point of sale.
  3. Transport packaging or tertiary packaging: this contains multiple products and facilitates storage and logistics.

Who is involved?

The Regulation introduces changes that affect the entire supply chain, from the producer to the end consumer. Responsibility for drawing up the declaration of conformity lies within the party identified as the packaging manufacturer. The different roles within the supply chain are:

  1. Manufacturer: the person or company that manufactures packaging or a packaged product, or has it designed or manufactured under its own name or trademark, subject to specific provisions for micro-enterprises. The manufacturer is responsible for drawing up the declaration of conformity.
  2. Supplier: the person or company that supplies the manufacturer with packaging and the technical documentation needed to assess its conformity.
  3. Importer: the person or company that imports packaging or a packaged product into the EU from a non-EU country.
  4. Distributor: the person or company, other than the importer or manufacturer, that makes packaging or a packaged product available on the market.
  5. Producer: the manufacturer, importer or distributor that places packaging or packaged products on the market.

What changes under the new Regulation?

  • Presence of heavy metals and PFAS (PFAS only for direct food contact)
  • Reduction in the weight and volume of packaged products
  • Harmonised environmental labelling across the EU
  • Recyclability according to grades A, B and C
  • Re-use of packaging

Calendar of PPWR deadlines

DateSubjectRequirements
From 12 August 2026Substances of Very High ConcernPackaging with direct food contact: limits for PFAS
From 12 February 2027ReuseHo.Re.Ca.: reusable containers for food and beverage
From 12 February 2028CompostabilityFor certain types of packaging
ReductionCommercial packaging: reduction of weight and volume
ReuseFor the Ho.Re.Ca. Industry
From 12 August 2028LabellingHarmonised labelling accross EU with material details
From 12 February 2029LabellingReusable packaging
From 1st January 2030Recycled contentPlastic packaging: minimum percentages
RestrictionsSpecific single use plastic packaging
ReuseFinal distributors over 400 m²
RecyclabilityAs per grades A, B or C
ReductionImballaggi multipli, trasporto, e-commerce: riduzione dello spazio vuoto
ReuseMinimum reuse percentages for some types of packaging
From 1st January 2035RecyclabilityOn large scale
Within 2038RecyclabilityAs per grades A or B
From 1st January 2040Recycled contentPlastic packaging: increase of the minimum percentages
ReuseIncrease of the minimum percentages for transportation packaging

How can you be ready for PPWR?

With the right approach and a knowledgeable partner, getting ready for PPWR is easy.

Some steps to take to start from:

  • Understand your company’s role in the supply chain and check whether it qualifies as a micro-enterprise.
  • Identify all the packaging used in your business, along with its materials and functions.
  • Ask your supplier for the technical documentation for each type of packaging.
  • Check that your packaging meets the PPWR requirements by assessing its conformity, and consider where improvements can be made.
  • Choose a reliable partner with up-to-date documentation who can supply a fully compliant product.

We are working through this process by gathering documentation from our suppliers and preparing technical information on our packaging. We are making this information available to our customers to help them fulfil their obligations, taking into account each party’s role and the final packaging configuration.

Each solution requires an individual assessment: the choice of material is a starting point, while conformity must be assessed in relation to the packaging, its intended use and the applicable requirements.

Ready to begin the next project, together.

For us, design means listening, sharing ideas and turning a need into a practical solution. PPWR brings new considerations to this dialogue and makes collaboration between those who make packaging and those who use it even more important.

Do you have packaging to assess or a new product to package? Let’s start there. We bring expertise, design skills and documentation support to help create bespoke packaging together, with a path to compliance built on verifiable decisions and information.

FAQ – all the answers to your questions

Must i produce PPWR documentation if my company is a micro-enterprise?

No, companies that qualify as micro-enterprises (employing fewer than 10 people and with an annual turnover not exceeding €2 million) cannot be considered manufacturers and therefore do not have to draw up the packaging’s declaration of conformity. In these cases, responsibility lies with the packaging supplier.

Wh is considered a packaging’s Manufacturer?

‘Manufacturer’ refers to any legal entity that manufactures packaging or a packaged product. Where a legal entity has packaging or a packaged product designed or manufactured under its own name or trademark, that person is considered the ‘manufacturer’, regardless of whether any other trademarks are visible on the packaging or packaged product. Where that entity qualifies as a micro-enterprise and the packaging supplier is located in the same Member State, the supplier of the packaging is considered to be the manufacturer.
The manufacturer is therefore responsible for requesting from its suppliers and, where necessary, its customers the information and documentation needed to draw up the EU declaration of conformity, which must be prepared and kept up to date in accordance with the guidelines set out in Annexes VII and VIII to the PPWR.

Is the new regulation only for Italy?

No, the regoluation involves all packaging made, sold or imported into the EU.

What are the benefits of assessing my compliance with the PPWR today?

The Regulation became applicable on 12 August 2026, and all packaging buyers must take steps to ensure compliance. Designing packaging today that already meets the requirements reduces the risk of penalties and helps you continue selling your packaged products with confidence, now and in the future. Choosing Scatolificio Medicinese means having compliant packaging from the start and a team of advisers on hand.

What can I do with packaging I purchased before the Regulation became applicable?

The new sustainability and labelling requirements do not apply retrospectively to stock already placed on the market before 12 August 2026. Packaging placed on the market after that date must meet the requirements applicable at that time, even if it was purchased much earlier.
For commercial or multiple packaging, the manufacturer is normally the company that fills the packaging with its own product and then sells the packaged product. This is often when the packaging is first placed on the market. Each case must be assessed according to the type of business, the packaging and the market in which it is placed.

Are Scatolificio Medicinese’s packaging compliant with PPWR?

Yes, our packaging fully complies with the PPWR — and it did even before the Regulation entered into force! It meets the limits for heavy metals and PFAS and is tailored to the product it is designed to contain. This ensures that every detail of the packaging is optimised and that it is not larger than necessary for the product.

What documentation must i produce if I’m a Manufacturer?

A declaration of conformity for the packaging covering all manufacturing processes, and technical documentation containing the packaging’s technical specifications (weight, dimensions and composition), together with test reports or declarations relating to the raw materials used to manufacture it. All documents must be retained for five years for single-use packaging and ten years for reusable packaging, and made available to the authorities upon request.

Must I change the label on my packaging if I’m a Maufacturer?

Not necessarily, but you must check that the requirements for identifying the packaging and providing the manufacturer’s details are met. The packaging must bear a type, batch or serial number, or another identifying element. This information may only be provided in a document accompanying the packaged product if the size or nature of the packaging does not allow it to be displayed on the packaging itself. The manufacturer’s details may be displayed on the packaging or made available via a QR code or another data carrier, with further alternatives provided for in the Regulation.

To which industries does this regulation apply to?

The PPWR applies to all industries that use packaging. This includes, for example, packaging used in food and beverages, cosmetics, pharmaceuticals, mechanical engineering, fashion, retail and e-commerce. This does not mean that every type of packaging is subject to the same requirements: some provisions include exemptions for the packaging of specific products, which must be checked against each individual obligation.

Who can I ask if I have questions?

Contact Scatolificio Medicinese and ask for our quality department — we’re ready to help! As an ACIS member, we have access to expert advisers alongside our qualified in-house team.